Chamfer ORDERS ON AUTO CAD , BY MIND Maryanto , ST

Chamfer is one of AUTO CAD commands into the Modify group . Chamfer command is used to create a line between two lines are not parallel . In general, the command to create a chamfer bevel on the top edge of a corner . Chamfer command can be used to make a bracket for all angles polyline

To be able to use the chamfer command in AUTO CAD , follow the steps below.
1 . Prepare the image to be in chamfer

Picture before in chamfer

2 . Use one of the following commands to call chamfer
a. On the Modify menu , select the chamfer
b . At the command line type the chamfer or type cha which is a short-cut chamfer enter the command

3 . At the command line type D or Distance
On the command line in the command line
 ( TRIM mode ) Current chamfer Dist1 = 0.0000 , = 0.0000 Dist2
  Select first line or [ Undo / Polyline / Distance / Angle / Trim / Method / Multiple ] : D

4 . The first of the size of the input value that will be created on the hypotenuse which is 10
On the command line in the command line
Specify first chamfer distance < 0.0000 > : 10

5 . The first of the size of the input value that will be created on the hypotenuse that is 20
 On the command line in the command line
Specify second chamfer distance < 10.0000 > : 20

6.  Click on the first line and click on the second line and then press enter or right click on the mouse

How to get to use the chamfer angle :
1 . Use one of the following commands to call chamfer
a. On the Modify menu , select the chamfer
b . At the command line type the chamfer or type cha which is a short-cut chamfer enter the command

2 . At the command line type A or ANGLE
On the command line in the command line
  ( TRIM mode ) Current chamfer Dist1 = 10.0000 , Dist2 = 20.0000
  Select first line or [ Undo / Polyline / Distance / Angle / Trim / Method / Multiple ] : A

3 . Put value on the size of one of the lines that will be in chamfer
On the command line in the command line
Specify chamfer length on the first line < 0.0000 > : 10

4 . Input angle values ​​that will be used to make the angle of the chamfer
On the command line in the command line
Specify chamfer angle from the first line < 0 > : 45

5 . Click on the first line and click on the second line and then press enter or right click on the mouse

Image after the chamfer

FILLET

In AUTO CAD fillet is one of the commands that go into modify groups .
Fillet in AUTO CAD command serves to connect two objects or lines using circular arc with a radius the size specified .
How to use fillet to connect two lines with a circular arc using the radius of the large size specified
1 . Type the fillet in the command window
2 . On the form in the command window exit command
Current settings: Mode = TRIM , Radius = 0.0000
Select first object or [ Undo / Polyline / Radius / Trim / Multiple ] : type R
3 . On the form in the command window exit command
Specify fillet radius < 0.0000 > : type the number that represents the size of the specified radius . In this case we give the size of the radius of 90
4 . Click on the first line and second line then press enter , or right-click









Picture before in fillet









Images after in fillet

Command : fillet
Current settings: Mode = TRIM , Radius = 0.0000
Select first object or [ Undo / Polyline / Radius / Trim / Multiple ] : r
Specify fillet radius < 0.0000 > : 90

Drawing design table by Dian Pramesti,S.Pd

Drawing design table

DRAWING NOZEL By Budi Maryanto,ST

DRAWING NOZEL

picture Hammer By Budi Maryanto, st

Working drawings Hammer

picture Hammer

ORDER FOR CUT TRIM LINE OBJECT OR OBJECTS BY MIND Maryanto , ST

Command trim function in AUTO CAD is to cut the line or drawing object , so that a line or object images may be cropped right on the edge of the boundary depicted by lines or other drawing objects . Using TRIM cutting can be done on , line , arc , circle , polyline , elippse , spline , xline , region , block and can also be done in the form of spatial objects in the paper space viewport 
.
HOW TO USE THE ORDER OF THE TRIM ON OBJECT IMAGES
The steps are as follows
1 . Prepare an image object as below

Image ; object image will be cut with the TRIM command

2 . Perform one of the following commands , to call the TRIM command
a. Click the Modify icon on the tool bar TRIM
b . On the MENU BAR click Modify , and select and click TRIM
c . In the command window , type the TRIM then enter or right click on the mouse
3 . Select and click on the line that acts as a cutter , in this case is the line that had me give a red color and then press enter or right click on the mouse

Image ; object image that acts as a cutter in this case the lines are colored red

4 . Select and click on the line will be cut by using the TRIM command , in this case the black line , then press enter or right click on the mouse . Then the line is selected and clicked to cut and does not appear on the monitor screen , while the connection of a line that is not selected and not clicked on is not truncated

Image ; object image will be cut by using the TRIM command , it lines the black

CAR MODIFICATION FOR DRAG IMAGES BY MIND Maryanto, ST

CAR MODIFICATION FOR DRAG IMAGES